- What size curtains do I need for a 6ft window?
- How do I get the right size curtains?
- How do you hang a curtain rod without drilling holes?
- How do I measure for a curtain pole?
- How many curtains do I need for 3 Windows?
- How thick should Curtain Pole be?
- How do I keep my curtain pole from falling down?
- How high do you put a curtain pole above the window?
- How much fullness do you need for eyelet curtains?
- How can I hang curtains without putting holes in the wall?
- How do you strengthen a curtain pole?
- How much should a curtain pole overhang?
- Do curtain rods need to be hang on studs?
- Should curtains touch the floor?
What size curtains do I need for a 6ft window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness..
How do I get the right size curtains?
Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side), and divide that number by how many drapery panels you want in the window.
How do you hang a curtain rod without drilling holes?
Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.
How do I measure for a curtain pole?
Measure the recess width of the window and then add at least another 15cm for each side – 30cm in total. Our curtain poles are available with, or without rings. Each being suitable for curtains without or with eyelets respectively. If you need additional curtain rings or hooks these are available as accessories.
How many curtains do I need for 3 Windows?
At the Top of Each Panel contains a 3-4 inch pocket for rod Entry Approximate Dimensions: 9 feet ( 108″ ) long 5 feet wide (60″) EACH 2 PANELS TOTAL.
How thick should Curtain Pole be?
28mmWooden curtain poles start at a 28mm diameter. The most common diameters for a curtain pole is either a 28mm or 35mm.
How do I keep my curtain pole from falling down?
Get a piece of wood just slightly longer then the window, and about 2 inch wide by 15mm thk. Drill it and get the plaster board fixing in wall. Than glue the wood and screw it to the wall. This will never fall off once the glue has set.
How high do you put a curtain pole above the window?
DO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.
How much fullness do you need for eyelet curtains?
CURTAIN STYLEFULLNESS RATIOEyelet Curtains1.35 – 1.55 depending on Eyelet positioningRod Pocket Curtains1.00Flat Curtain Panel1.00Wave Curtains2.25 more rows
How can I hang curtains without putting holes in the wall?
Renter-Friendly Window Treatments That Don’t Damage WallsUse Temporary Command Hooks.Hang Curtains With Tension Rods.Order Custom Compression Shades.Make a Faux Roman Shade.Buy Twist & Fit Curtain Rods.Suspend Curtain Rods from the Ceiling.
How do you strengthen a curtain pole?
To reinforce a curtain rod, try these methods: Use curtain rod anchors or longer screws….Use Curtain Rod Anchors or Longer Screws. Traditional curtain rod brackets install into the wall with fasteners (nails and screws). … Use a Thicker or More Durable Curtain Rod. … Install Center Support Brackets.
How much should a curtain pole overhang?
But as a guide the pole should extend about 15-20cm (6-8in) beyond the window recess on each side. And it should be fitted symmetrically relative to the window opening.
Do curtain rods need to be hang on studs?
If there IS NOT a stud, you will use a drywall anchor and a screw. The anchors are the white pieces in the below photo: Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod. … If you do not have a stud finder, you can use a hammer and a nail.
Should curtains touch the floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.